iVue Robotics LLC
Rated to operate at up to 240°C continuous (340°C maximum) temperatures, the
KDE 2315XF-885 motors enable comfortable operation in tropical or arid climates.
Electronic Speed Controllers (ESCs):
KDEXF-UAS20LV
The KDEXF-UAS20LV ESCs are tuned with Dynamic PWM and Motor Advance
Timing algorithms to deliver highly efficient performance for stable operations.
Receiver:
FrSky RX6R
Using the FrSky RX6R receiver, Develop Air is compatible with many transmitters
for manual remotely controlled operations within a 1.5mi (2.41km) range.
Telemetry Radio:
HolyBro
915 Mhz 500 mW
With a 915 Mhz 500mW HolyBro telemetry radio, Develop Air is capable of
autonomous remotely controlled operations within a nearly 2mi (3.2km) range.
Skateboard / Airframe:
Nylon-12 SLS
Develop Air was designed by iVue Robotics to be weather resistant, lightweight,
and rugged with a SLS printed Nylon-12 skateboard and EPDM Rubber Foam gasket.
Propellers:
9.4” Master Airscrew MR Series
Including a built-in nut for ease of installation, the 9.4” Master Airscrew MR
Series propellers are designed to maximize performance while also minimizing noise.
Battery:
MaxAmps LiPo 6000XL 3S 11.1v
The Max Amps LiPo 6000XL 3S 11.v boasts a 100C rating for quickly and safely
discharging the waterproof, high capacity battery.
Side Plates:
Blank
The blank side plates can be replaced with Dual Power, DB9, and Signal side
plates for data and power pass through to mounted sensors and electronic payloads.
Quick Release Payload Rail:
Zinc Plated Steel Mini DIN Rail
Payloads like sensors and deployment mechanisms can be conveniently
mounted on Develop Air with the Quick Release Project Rail designed by iVue Robotics.
Position & Status Indicator Lights:
4 Position & 5 Status LEDs
Quickly check the orientation, status, and position of Develop Air before, during,
and after
fl
ight operations with the onboard position and status LEDs.
Page of
3
8