7
More information at
www.ivt-hirschau.de
GB |
GB |
INTENDED USE
This LED work lamp is designed for mobile lighting in indoor and outdoor areas. Any other use than that
described above may damage this product. Moreover, hazards such as short-circuit, fire, electric shocks
may occur. The entire product must not be modified and/or converted!
PRODUCT DESCRIPTION
This lamp offers everything an ideal work lamp needs: long run time, useful features, rugged splash-
proof housing, easy use, helpful accessories.
The bright 5 W LED generates good working light offering at least 2 hours of operating time at full
power. If you do not need bright light, a lower brightness level will extend the run time of your lamp.
Due to the swivel-mounted lamp head, the light beam can be exactly directed onto your work area.
The emergency light function is an essential safety factor in case of mains failure. In flashing mode with
mounted diffusing plate
(optional accessory)
, the work lamp can be used as a highly visible warning light.
The optionally available wall / car mount made of metal is a practical solution for the safe storage of the
work lamp.
FEATURES
• Powerful 5 W LED, 350 lumen
• Maintenance-free lithium-ion battery 7.4 V/2,200 mAh
• 2 brightness levels
• Flashing mode
• Emergency light function
• Swivel-mounted lamp head
(120°)
• Charging control display
EMERGENCY LIGHT FUNCTION
In case of mains failure, the work lamp is automatically switched on. To use this function,
proceed as follows:
1. Connect the power unit with the charging cradle.
2. Switch on the work lamp.
3. Put the switched-on work lamp in the charging cradle – the lamp goes out.
i
Simulation of the emergency light function:
Disconnect the power unit from the 230 V socket. The work lamp is automatically
switched on at brightness level 1
(A)
.
ELECTRONIC DEEP DISCHARGE PROTECTION
This work lamp is equipped with electronic deep discharge protection for the battery. This will extend
the service life of the battery and protects the environment.
