![background image](http://html.mh-extra.com/html/ivt/enl-30/enl-30_instruction-manual_2097814008.webp)
8
EN
Instruction manual
yourself. Instead, take the device to your nearest
authorized Service Center.
∙
To avoid danger, damaged power cord should
be replaced by manufacturer or its agent, or similar
qualified person.
∙
Immediately unplug the tool when its cable is
damaged or cut.
ATTENTION! DANGER OF ELECTRIC
SHOCK!
Consider working area environment. Do not expose
power tools to rain. Do not use power tools in damp
or wet locations. Keep work area well lit and dry. Try
to prevent the device from getting wet or being
exposed to humidity. Do not leave it outside
overnight. Water entering a power tool will increase
the risk of electric shock.
∙
The power supply cable should be checked
regularly and, before using it, make sure the cable is
not damaged or worn out. If the cable is not in good
condition, do not use the appliance; take it to an
authorized service Center.
∙
When tool is used outdoor, only use an extension
cable that is suitable for outdoor use and which is
marked for this specific use. Keep it away from the
working area, from damp, wet or oily surfaces and away
from heat and flammable materials.
∙
Avoid any accidental starting: make sure that the
power switch (if present) is in the «off» position, before
plugging the tool in.
∙
Remove adjusting keys or wrenches before turning
the tool on.
∙
Do not use the tool if the switch does not turn the
tool on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
WARNING! During the use of certain
power tools, some dust containing
chemicals known to cause cancer,
may occur.
Some of these chemicals are: lead from lead based
paints, crystalline silica from bricks and cement and other
masonry products, arsenic and chromium from chemically
treated lumber and other dangerous products. If dust is
present, your risk from these exposures varies,
depending on how often you do this type of work.
To
reduce your exposure to these chemicals, any time
you do pulverulent operations, work in a well
ventilated area and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
∙
If the appliance strikes a foreign body, examine the
device for signs of damage and carry out any necessary
repairs before restarting and continuing to work.
∙
If the appliance starts to vibrate abnormally, turn
it off and check for the cause immediately. Vibration is
generally a warning of trouble.
∙
Always switch off the appliance and wait until
the device completely stops whenever you leave
the machine, before carrying out maintenance,
before changing accessories, checking, cleaning,
troubleshooting or working on the appliance.
∙
It is forbidden to move or modify any of the internal
parts of the device.
Specific safety rules
∙
Wear the necessary protective clothing, in particular
safety goggles, when working with the electric nailer.
∙
Watch your fingers! Wear gloves! Keep your hands
and all your body away from the processing area.
∙
Make sure that the workpiece you wish to staple is
held securely by a clamping device or a vise. Never hold
the workpiece simply in your hands.
∙
Always keep the magazine free of foreign material.
∙
Make sure that the tool is clean and that the
ventilation slots are free and clean.
∙
Never use the tool with staples or nails which are
not suitable for it. The use of improper staples and nails
may cause injury or damage the device.
∙
Don’t insert staples or nails while the electric nailer
is in function.
∙
Do not use the tool when other people or animals
are in the near vicinity.
∙
Never shoot staples or nails into the air. Staples and
nails shot at short distance can lead to serious injuries.
∙
Hold the tool firmly to prevent loss of control.
∙
Do not use this tool to fasten electrical wiring.
∙
Always guide the power cable from the back of the
tool. Make sure not to staple the power cable of the tool
by accident.
∙
Do not shoot staples or nails on already driven in
fasteners. This could cause the fastener to deform, the
fasteners could become jammed or the tool could move
uncontrolled.
∙
Take special care when working with thin materials.
It is possible that fasteners can burst through thin
workpieces or be deflected when working in corners or
against edges and hurt people. Pay great attention!
∙
Never push in the nailer head manually: there
is danger of injury when at the same time the trigger
switch is activated unintentionally.
∙
Avoid damage that can be caused by screws, nails
and other elements in your workpiece; remove them
before you start working.
∙
Do not use the tool for fastening ceiling panelling on
profiled wood or grooves.
Summary of Contents for ENL-30
Page 4: ...4 1 1 2 mm 15 mm 8 14 mm 2 0 mm 2 3 4 0 75 mm 11 3 mm ENL 30 ...
Page 5: ...5 4 3 2 3 1 2 1 F1 F2 ...
Page 42: ......
Page 43: ......