Bluetooth Connection Management
Bluetooth Connection Management includes:
• Find Remote Devices
• Connect and Disconnect
• Connect via Shortcuts
• Remote Device Status
Find Remote Devices
To set up a Bluetooth connection, the remote device must be found first. There are 3 ways to find
remote devices in BlueSoleil.
Inquire Device
1.
Single-click the red ball in the main window to start inquiry.
2.
Bluetooth
devices within the radio range will be shown around the center ball.
3.
Wait for a few seconds until the names of all the devices are obtained.
Add Device from History List
The devices which had been found or connected can be added from the history device list directly.
1.
Select menu Tools | Add Device from History.... The History dialog box pops up.
2.
Select the device from the list and click button Add, the device will be added to the main
window.
Add a New Device by Entering Device Address
If the device cannot be found by Inquiring, you can enter the device address to add the device.
1.
Select menu Tools | Add New Device.... The Add New Device dialog pops up.
2.
Enter the Bluetooth device address and click button OK, the device will be added to the main
window.
Note: The device type will be unknown if add it by inputting its Bluetooth address.
Connect and Disconnect
Connect
1. Select a remote device and double click it to browse its services.
Bluetooth
passkey may be asked if security level of either side is set to high and they are not
paired devices.
After service browsing, the services the remote device supports are highlighted by changing the
color of the service buttons on the top of the main window.
2. Single click one of the service button to connect.
After connection is setup, the remote device and the service button will turn green.
Note: Users can right click the remote device icon or the service button to pop up operation
menu for connection.