![background image](http://html1.mh-extra.com/html/ivt/ae-x09dr-n/ae-x09dr-n_operation-manual_2097716008.webp)
1
Remove the remote control
cover.
2
Insert batteries in the compart-
ment, making sure the
±
and
—
polarities are correctly
aligned.
• The display indicates "AM
6:00" when batteries are prop-
erly installed.
3
Reinstall the cover.
USING THE REMOTE CONTROL
E-6
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards
the unit’s signal receiver window
and press the desired button. The
unit generates a beep when it re-
ceives the signal.
• Make sure there is no curtain or other
object between the remote control and the
unit.
• The remote control can send signals from
up to 7 metres away.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
Remote control
cover
+
-
+
-
AY-XP09DR-NC_Eng P6.5
04.6.25, 8:29 AM
8
Summary of Contents for AE-X09DR-N
Page 2: ......
Page 23: ...ENGLISH...