GB-4
LOADING BATTERIES
Use two size-AAA (R03) batteries.
1
Remove the remote control cover.
2
Insert batteries, making sure the (+) and
(-) polarities are correctly a lign ed.
• The display indicates “AM 6:00” when batteries
are properly installed.
3
Reinstall the cover.
USING THE REMOTE CONTROL
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the unit’s signal
receiver window and press the desired button. The unit
generates a beep when it receives the signal.
• Make sure there is no object between the remote
control and the unit.
• The signal effective distance is 7m.
CAUTION:
• Do not expose the receiver window to direct sunlight.
This may adversely affect its operation.
• Use of certain fl uorescent lamp in the same room
may interfere with transmission of the signal.
• Do not leave the remote control in direct sunlight or
near a heater. Protect the unit and remote control
from moisture and shock.
• The current time cannot be set when the timer is
operating.
Battery cover
NOTE:
• The battery life is approximately 1 year in normal use.
• Replace the batteries when the remote control dis-
plays “ ”.
• Rechargeable batteries are not recommended to use.
• When replacing the batteries, always change both
and use the same type.
• If you will not be using the unit for a long time, remove
the batteries from the remote control.
SETTING THE CURRENT TIME
There are two clock modes: 12-hour mode and 24-
hour mode.
1
To set the 12-hour mode, press the CLOCK
button once.
To set the 24-hour mode, press the CLOCK
button twice.
2
Press the TIME ADVANCE or REVERSE
button to set the current time.
• Hold down the button to advance or reverse the time
quickly.
3
Press the SET/C button.
• The colon (:) blinks.
NOTE:
• The current time cannot be set when the timer is set.
3
2
1