manualshive.com logo in svg

Ivoclar Vivadent 747827AA, Operating Instructions Manual

Share
Download
Ivoclar Vivadent 747827AA Operating Instructions Manual Download Page 36

36

5.2.7  Starting and stopping programs / the operating indicator

Once the program is started by pressing START, the firing curve display appears. 

The following information is displayed:

–  Information bar

  The information bar in the upper margin of the display, program name and the current furnace temperature are 

 indicated.

–  Main area

  The vacuum is shown on the left side of the main screen. The progress of the program is shown in the form of a firing 

curve. The estimated remaining time is also displayed in 10-second intervals. If no vacuum is activated, the vacuum 
 indicator and all the corresponding parameters are blank.

  The process status is shown in colour in the firing curve:
  – Orange: Program is closing the furnace head or is in predrying mode.
  – Red: Program is heating up or is in holding time mode.
  – Blue: Program is in long-term cooling or is opening the furnace head.

  Active firing program options are shown in the grid next to the 

[Options]

 button.

  If a two-stage program is selected, the firing curve is shown in two stages.

5. Operation and Configuration

Summary of Contents for 747827AA

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands