Remark:
CVBS: Composite Video. Set the video output to interlacing component output.
YUV
Notes: It must be in stop status when choosing
NTSC PAL Auto TV system.
Notes:
It must be in stop status when selecting CVBS or YUV video output.
YUV: Set the video output to YUV output.
1) Power-on the unit.
2) Make sure no disc was played inside the tray.
3) Insert a USB key inside the connector.
4) Press the USB key from the remote control to start.
Remark
: Depending on the capacity of the device, the reading can take more than 1 minute
before lauching the video.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch on the USB device
before it can operate.
- This unit does not support a direct USB connection with a computer. You need to use a USB
device, a MP3 player .
- Check that the files system of your USB device is formatted into the FAT or FAT 32 format.
USB device formatted into NTFS are not compatible with this unit. Caution: if you attempt to
modify your file system, formatting your device will erase all data. Please refer to your USB
device’s instruction manual first.
- Warning: Connect your USB device directly to the USB port of the device. Using an extension
cable is not recommended and may cause interference and failure of data transfer.
5. Connecting a USB device
Summary of Contents for iVIEW-103DV
Page 1: ...103DV Media Player iVIEW 103DV...
Page 2: ......
