IVIEW CZ-50X, User Manual, Page: 8 / 29

8
Protocol: Pelco-D.
2.2.1 Camera ID Setup

The range of ID is 0~255. Factory default of Camera ID is 1.

ID number of camera is set using binary number. The number from 1~8
present 1, 2, 4, 8, 16, 32, 64, 128. For example, switch 1, 3, 5, 7 to “ON”
position, the corresponding ID should be 1+4+16+64=85.
The example is shown bellow.
ID No Code Switch
ID No Code Switch
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
0 0 0 0 0 0 0 0 0 10 0 1 0 1 0 0 0 0
1 1 0 0 0 0 0 0 0 20 0 0 1 0 1 0 0 0
2 0 1 0 0 0 0 0 0 30 0 1 1 1 1 0 0 0
3 1 1 0 0 0 0 0 0 50 0 1 0 0 1 1 0 0
4 0 0 1 0 0 0 0 0 100 0 0 1 0 0 1 1 0
5 1 0 1 0 0 0 0 0 101 1 0 1 0 0 1 1 0
6 0 1 1 0 0 0 0 0 150 0 1 1 0 1 0 0 1
7 1 1 1 0 0 0 0 0 200 0 0 0 1 0 0 1 1
8 0 0 0 1 0 0 0 0 255 1 1 1 1 1 1 1 1
2.2.2 Communication Protocol and Baud rate Setup