IVIEW 360 Pro, Quick Start Manual

Page: 5 / 16

- 2 -
Quick Start Guide
1. Install Micro SD card:
2. Power-on/off
Insert the Micro SD card into the slot as indicated, as shown on the right.
Power-on:
Press and hold Power button for about 2 seconds and release,
until it beeps. The display screen will light up, as shown below, indicating
the product is ready for use (photo-shooting mode is loaded on startup by
default).
Power-save mode: If the device is idle, the system will enter power-save
mode after 1 minute. The display will automatically turn off. The camera
can be reactivated by pressing any button.
·
If power-on fails, charge the camera first, and see whether the blue
indicator lights up during charging. If yes, it indicates the product is
being charged.
·
A branded high-speed 8GB Micro SD
card between Class 6~Class 10 is
recommended; otherwise, this product
may not work normally.
·
Make sure to format the Micro SD card
before placing it in the device. Do not
use the Micro SD card to store other
devices' files.
·
Please turn off the camera before you
insert or remove the Micro SD card.
Important:
Important:
Micro
SD Card
IVIEW