3.
The Card Reader:
Terminal is equipped with a bi-directional Magnetic
Stripe Reader located immediately above the display.
The Magnetic Stripe on the card should face down and
to the rear of the terminal. The card should be swiped at
uniform speed and pressure, ensuring that the card
remains in contact with the bottom of the track
throughout the entire swipe action.
4.
Smart Card Reader:
The terminal is equipped with Smart Card Reader slot at
the front of the terminal for future use.
5.
Cleaning procedure:
1. Clean the outside of the terminal with a soft cloth
moistened with a mild detergent solution.
2. Never spray cleaning solution directly onto the
terminal as drops may enter the unit.
3.
Do not use Isopropyl Alcohol based cleaning
products.
6.
Technical specifications:
6.1 Terminal Features:
•
Magnetic card reader, ISO1 and ISO2 tracks
decoding.
•
18 key, backlit tactile feedback keyboard with audible
tone and color coding.
•
Battery backed-up calendar and clock.
•
RS232 communications channel.
•
Multi-application operating system allowing each
application to be downloaded independently of all
others.
•
Logical and physical security.
6.2 Network:
The terminal is equipped with an RF modem for
exchanging data over one of the following networks:
1. MOBITEX.
2. CDPD
3. ARDIS (DataTac) – future option.
6.3 Power supply:
The power adapter is mainly used for charging the
internal NiCd battery.
Power input voltage
: 120V AC.
Power input frequency
: 60 Hz.
Power output
: 12V DC, 500mA.
Figure 4:
DC Plug
6.4 Operating environment
Operating temperature : 5 to 40°C
Humidity : 5% to 90% RH, with no condensation.
7.
If you experience trouble :
Call one of the customer service centers listed below:
In Canada:
In the USA:
RBA Inc.
IVI Checkmate Inc.
3190 Orlando Drive
TotalCARE
Mississauga, Ontario
1335 North Meadow
L4V 1R5
Parkway, Suite 116
1-800-387-3938
Atlanta Ga 30076
or (905) 672-1048
1-800 - 435-3014
US Federal Communications Commission (FCC)
Warnings:
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
this equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Canadian Department of Communications (DOC)
Warnings:
This digital apparatus does not exceed the Class A limits
for radio noise emissions from the digital apparatus as set
out in the radio interference regulations of the Canadian
Department of Communications.
™
Elite 780 RF
Installation guide
0130-07056-0200
