DIGISPENSE 3009 CONTROLLER MODULE, STYLE B
Page 3-39
29 October, 2019
IVEK Corp. P03R017E
3.4.7.1 Power Up Screen
Keylock/Supervisor
D = Display
P = Push-button Accessible
I/O Test
C = Display/Change
N = Not Accessible/Viewable
Operator
0
DIGISPENSE 3009
<
— status —>
2
3
4
IVEK CORPORATION
5
http://www.ivek.com
6
7
RECIPE =
##
8
MOTOR/BASE =
#
9
10
11
12
Press function button below to proceed
13
if prime mode and dispense mode
14
*
PRIME
*
DISPENSE
CONTRAST
15
SCREEN
SCREEN
ADJUST
OR if dispense mode and disabled fluidic setup mode
14
DISPENSE
CONTRAST
15
SCREEN
ADJUST
OR if prime mode and disabled production mode
14
PRIME
CONTRAST
15
SCREEN
ADJUST
OR if disabled fluidic setup mode and production mode
14
SETUP A
CONTRAST
15
SCREEN
ADJUST
OR if NO motor/base selected
14
PRIME
DISPENSE
SETUP C
CONTRAST
15
SCREEN
SCREEN
SCREEN
ADJUST
OR if reference recommended
14
PRIME
DISPENSE
REFERENCE
CONTRAST
15
SCREEN
SCREEN
ADJUST
OR if faulted
14
FAULT
CONTRAST
15
SCREEN
ADJUST
NOTE
*
Field 3 will display PRIME SCREEN when in Prime
mode or AGITATE SCREEN when in Agitate mode.
*
Field 4 will display DISPENSE SCREEN when
in Dispense mode or METER SCREEN when in
Meter mode.
----- Displays the Controller Module Status ........ D D D
----- Displays the current recipe .......................... D D D
----- Displays the motor/base selection ............... D D D
The following screens are accessible from
this screen based on the system status.
Agitate .................................................................. P P P
Contrast Adjust .................................................... P P P
Dispense .............................................................. P P P
Fault ..................................................................... P P P
Meter .................................................................... P P P
Prime .................................................................... P P P
Setup C ................................................................ P P P