16
Accumulative Load Weight Function Without Onboard Printer:
Left Button
:
Accumulative function for load weights
Every time the
indicator shows the load weight
and the
left button
is pressed, the load weight will be
added into a weighing counter and will show the current total weight of all load weights entered in the
counter.
(A quick “blink” on the display indicates that the current load weight has been added into the
counter.)
To reset the current load weighing counter, press the
right button
. This will reset the current total and the
cycle will start all over.
Right Button
: Reset
Note:
Weight loads can be added only while the indicator shows the current load weight. If the load weight
is lowered and
Mode 8
is shown on the display, the last load weight will not be added even if the
left
button
is pressed.
The maximum number of load weights entered into the accumulative counter is 40. If 40 loads have been
reached, the display will show the current total weight of all 40 loads weight entered. This current total
weight will stay and “flash” on the instrument display for a moment. The current accumulative counter of all
40 loads weight will be reset automatically and you can start the new cycle again.
