23
3.3 NP-600S Networking
3.3.1 Networking via Ethernet
The NP-600S is equipped with a 10Base-T Ethernet controller. To utilize it, change
the device name when the NP-600S is first turned on.
Step
1
Click “Start/Settings/Control Panel”
2
Double click “Network and Dial-up
Connections”
3
Find the default device name. Change it to
a unique one depending on the plan of
individual LANs.
LAN90001
4
If the NP-600S is a node of a LAN with
DHCP servers, it is now available.
5
If the NP-600S is a node of a LAN with
fixed IP server, please consult with MIS to
get specific IP address. Click
“Start/Settings/Control Panel”. Double
click “Network and Dial-up Connections”
and update the IP address.
6 Use
the
cecp
utility “Save registry” to save
this changed.
