Before First Use
Before using the Pro Light Hair Removal System for the first time, it is suggested that you
perform a skin sensitivity test. Follow these instructions:
1. Attach HR Lamp to main unit.
2. Press trigger to apply two (2) or three (3) light pulses to a clean area of skin.
3. Wait 60 minutes and check for any reaction in skin.
4. If there is no redness or other skin reaction, proceed to use this product as needed.
Getting Started
1. Clean lens of your selected treatment lamp (HR) with a wet cloth or cotton swab to
ensure that there is no hair or dust, which may interfere with the unit’s performance.
2. Connect AC adapter to the main unit and to a wall outlet.
3. Ensure that the unit will be used away from all liquids.
4. Ensure that the treatment lamp is securely connected to the main unit.
5. When the unit is plugged in, green status indicator lights (on
the left and right sides of the unit) will flash.
6. Press the POWER button for two (2) seconds to turn the unit
on. The LCD screen with light and the internal fan will start (indicated by a FAN icon on
the
LCD).
7. When the status indicator flashes, the unit is ready to use.
8. Once the lamp contacts skin, the indicator will turn green and ready to emit light pulses.
9. Short press the POWER button to adjust the energy level (1-5)
10. Apply the treatment lamp directly to skin holding the unit vertically.
11. The unit will turn off automatically if not in use for more than five (5) minutes
Adjusting Energy Level
Select energy level according to your skin tolerance and increase gradually from level 1 to 5.
Apply only ONE pulse at a time, moving around the treated area. Wait at least 20 seconds
before applying a second pulse to a given area of skin. Multiple repeated pulses may cause
skin damage.
Using Treatment Lamp
•
Used for the removal of lip hair, body and leg hair, bikini line hair and other unwanted or
unsightly
hair.
•
The effectiveness depends on skin tone (see chart below) and is not suitable for white or
very light colored hair.
For Hair removal, follow these steps:
1.
Shave and clean selected area.
2.
Wear goggles to protect eyes.
3.
Choose energy level (1-5).
4.
Allow lamp to directly touch skin while holding main unit vertically.
5.
Repeat steps 1 – 4 up to three times.
6.
Apply anti-hair (hair removal) cream after treatment.
7.
Power the unit OFF using a wet cloth of cotton swab to clean lamp window.
HR Treatment Regimen
Between seven (7) and nine (9) treatments are suggested.
•
First three (3) treatments – once per week
•
Remaining four (4) to six (6) treatments – once every 2- 3- weeks.
•
Repeat treatments every two months as needed.
Customer Service:
[email protected]
866-849-3049
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
Made in China
Ivation is a trademark of
C&A IP Holdings, LLC
©2015 All rights reserved
