background image

• Make sure to familiarize yourself with the appliance before using it. 
• Before using this appliance, check all the parts to make sure they 
   function properly, and are undamaged.
• Make sure that every detachable part has been properly installed 
   before you plug the unit in. 
• Never run the juicer without something to juice. 
• Always inspect the cord and other parts of this unit for signs of damage  
   before attempting to plug it in. If the power cord is damaged, it must be 
   replaced by Ivation® Customer Service or a qualified service technician.
• Never use this unit in an area subject to excessive moisture, heat, or 
   humidity, or in the immediate surroundings of a bath, shower, swimming 
   pool, or similar bodies of water, as this presents an electrical shock 
   and/or fire hazard.
• Never use this juicer in an environment with flammable or explosive 
   gases or strong magnetic fields, as this could damage the product or 
   cause a fire.
• Do not attempt to juice sugar cane with this machine. 
• Always make sure the rated voltage of the outlet is within the 
   recommended range of 120V ~ 50/60Hz or else the product could 
   become damaged.
• Do not attempt to run this juicer continuously for longer than 15 minutes 
   at a time. The intelligent chip inside the juicer will automatically disable 
   the motor after 15 minutes. 
• If the juicer is blocked due to becoming overloaded or the food being too
   hard, it will automatically stop. Once it beeps, you can restart the machine. 
• If there is anything unusual occurring, disconnect the juicer and clean 
   the feed tube before restarting it.
• Make sure to cut your food down into sizes that will fit through the 
  food inlet. Always use the pushing rod, and make sure to push the 
  food slowly, gently, and at a consistent pace. 
• Do not attempt to juice foods that are over 140° F (60° C) as this 
   could cause burning or breakage of the internal components.
• The components which come in contact with your food conform to food 
   

material certification requirements, and are clean, healthy, and reliable. 

• It is normal for certain components to end up with a slight discoloration  
   after juicing, especially when heavily pigmented fruits or vegetables are 
   involved.
• Do not directly heat this product, or put any of the plastic parts into a 
   dish washer or water that is above 140° F (60° C). Never use steel wool, 
   abrasive cleaners, or any corrosive liquids to clean this product.
• This juicer and its parts are not dishwasher-safe.
• Do not use any parts other than the parts supplied with this product, as 
   this could affect the juicer’s performance, damage it, or cause an accident.

4

PRODUCT PRECAUTIONS

PR

ODUCT PRE

CA

UTIONS

Summary of Contents for IVMJ401B















Reviews: