8
1. Connect the power cord to the device and plug
the other end into an electrical outlet.
2. Insert one end of the supply tube into the ozone
outlet of the device and attach a diffuser stone to
the other end of the tube.
3. Turn on the device by pressing the On/Off button
on the control panel.
NOTE: The On/Off button will light up red when
device is on.
4. Select one of the six modes on the control panel
that suits your current need.
NOTE: Operating time will vary and need to
change depending on the size of your room,
amount of water being used, or food being
treated.
5. Press the Time Up (+) or Time Down (-) button
to set custom time. The unit will start to operate
five (5) seconds after selecting a mode or setting
a time.
NOTES: The unit will automatically turn off when
timer runs out. The timer will run through one
time then it must be set again for the unit to
operate once more.
Brushes found in the negative ion outlets can
get dusty quickly. Make sure to wipe the brushes
often with a soft, dry cloth to keep device
operating efficiently.
USING THE OZONE
GENERATOR & STERILIZER
USAGE
US
A
GE