STEP 3.
Drill a pilot hole into each mark using a
1/4” wood drill bit.
A. If screws will go into three studs, no
drywall anchors are needed.
B. Tap the drywall anchor(s) (C) carefully
into the drywall holes until they are flush
with the drywall surface. Use care to
avoid damage.
STEP 4.
Align the holes in the wall bracket (E)
with the pilot holes and drywall anchors.
Thread wood screws (B) through washers
and holes in the wall bracket, then directly
into the wall studs and/or drywall anchors.
Make sure bracket is level. Tighten all
screws securely with a screwdriver.
Mounting into three wall studs Mounting into two wall studs and drywall anchors
STEP 5.
A. With the help of a capable adult, lift
the fireplace (A) and align the hooks on
the back of the fireplace with the slots
on the wall bracket. Carefully set the
hooks into the slots.
B. Secure the fireplace to the wall bracket
with two M4x8 metal screws (D), one on
each side. Thread the screws through the
fireplace and into the wall bracket side
tabs. Tighten both screws with a Phillips
screwdriver. The unit may now be
plugged in.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could result in electric shock,
fire, or personal injury.
A
f
C
C
C
B
B
B
B
B
B
E
E
B
B
A
A
E
D
4
