3
PARTS
1. Steam
handle
2. Steam
trigger
3. Steam trigger lock latch
4. Steam
hose
5. Tank fill cap
6. Pressure
gauge
7. Brush
holder
8. Floor scrub brush
9. Carry
handle
10. Measuring
cup
11. Funnel
12. On/off
switch
13. Heat
light
14. Extension
tubes
15. Wheel
16. Rotating
brush
17. Window
squeegee
18. Round bristle brush (large)
19. Round bristle brush (small)
20. Angled power jet tip
21. Floor scrub brush adapter
22. Small tip adapter
23. Cleaning cloth
UNDERSTANDING THE STEAM CLEANER
• During use, the orange steam indicator light may turn on again. This means that the steam pressure may
be too low. If this happens, release the steam trigger for a few seconds. When the orange steam indicator
light turns off again, you can resume using the product.
• If the pressure drops too low, the pressure gauge will appear in the yellow zone. This means that the steam
flow may not be sufficient, depending on the accessory used. If this happens, release the steam trigger and
wait until the pressure gauge reaches the red zone again.
• When activating the steam trigger initially, water may come out instead of steam. This is normal, as it can
take some time for the water in the unit to convert into steam. Wait a little bit, and steam should start to
come out instead of water.
- If there is still water coming out, it may be residual water trapped in the hose from the previous use. If this
happens, point the handle over a bucket or sink and pull the steam trigger until the water is drained from
the
unit.
8
3
4
5
6
15
12
13
10
11
7
1
2
14
9
17
17
23
23
22
22
21
21
20
20
19
19
18
18
6
16
