6
2. Drill four (4) holes in the wall at the marked locations
and insert four (4) wall anchors. Line up the anchors
with the holes in the back bar and insert the four (4)
expansion bolts. Tighten the bolts so the back bar is
firmly in place.
3. Unfold the mounting brackets and slide the brackets
onto the back bar from the ends of it. Then, adjust
the spacing between the two (2) mounting brackets
so they are in the desired position.
4. Mark where you want the mounting brackets to be
placed. Slide the mounting brackets to the side and
drill in two (2) more holes for each mounting bracket
in the wall.
5. Slide the mounting brackets back to their previous
position and align the holes in the wall with the
holes in the vertical bar of the mounting brackets.
INSTALLATION
INS
T
ALLA
TION