TROUBLESHOOTING
12
TROUBLESHOOTING
PROBLEMS
SOLUTIONS
The pump will not start.
The pump is running,
but there is no water.
The water pressure
is weak.
• Check the battery pack is securely
attached to the motor base.
• Check the battery pack is low or out of
power and needs to charge.
• Check that the O-ring is not missing on
each connector.
• Check that the suction hose is firmly
attached to motor base.
• If pump is faulty, contact authorized
service person for assistance.
• Air can get inside the hose & pump. If this
is the case, power on the device and let it
run for a few seconds to let the air escape
out of hose. Or check the following parts:
o Check that the nozzle is not clogged.
o Check that the inlet water filter is
not blocked.
o Check that the inlet water filter is
completely immerse into water.
o Check that the suction hose is not
bent and firmly attached to the
motor base.