Correct Placement
Place the unit with proper clearance from walls, furniture, or window coverings. Place the unit on a hard,
level surface. Close doors and windows in the room where the dehumidifier is operating.
IMPORTANT!
The pump intake mechanism is a plastic rod with a metal mesh filter at the end, located on the inside
left side of the unit. It will drop down into the reservoir when the pump feature is activated. Whenever
replacing the water reservoir after emptying it, make sure the pump rod is in its horizontal position or the
water reservoir will not install properly.
Quick Start Guide
1. Place the unit on a hard, level surface away from obstructions.
2. Close all doors and windows in the room.
3. Slide the water collection reservoir out toward you.
4. Remove any screws, hoses, or other items that may have been packed inside the reservoir.
5. Check that the pump intake rod has not dropped down. If it has, push it into its horizontal position.
6. Slide the reservoir back into position.
7. Plug the power cord into a proper receptacle. Do not use extension cords or adapters. Do not operate
another appliance from the same electrical outlet.
8. Press the power button to turn the machine on. It is recommended that you let the unit run for 24
hours upon first operation.
9. To set a preferred humidity level, please see the “Setting the Humidity” section in this guide.
10. To set auto start and stop times, please see the “Setting the Timer” section in this guide.
11. To increase the fan speed, press the Turbo button.
AIR OUTLET
20" OR MORE
AIR INTAKE
10" OR MORE
10" OR MORE
10" OR MORE
10" OR MORE
PUMP INTAKE