2
3
SAFETY PRECAUTIONS
1.
⚠
WARNING: CHOKING HAZARD – Small parts.
This product contains small parts and is not suitable for children
under 3 years old.
2. Remove all packaging before using this device. Please keep all packaging materials out of reach of children and pets.
3. Properly dispose of all packing materials immediately after unpacking product, as the bags used for packaging could
present a suffocation or choking hazard.
4. Read all instructions carefully before attempting to operate this device. Improper usage could result in a reduction
in
efficacy.
5. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
6. Do not immerse the unit in water or use outdoors.
7. Do not place or store appliance where it can fall or be pulled into a tub or sink.
8. Do not place in, or drop into, water or other liquids.
9. If an appliance falls into water, unplug it immediately. Do not reach into the water.
10. Do not use this unit to warm wet items; warm dry items only. Placing soaking wet items in the appliance could
damage the product or create the risk of electrical shock.
11. Never operate if air openings are blocked. Keep the openings free of hair, lint, and the like.
12. Never drop or insert any object into any opening.
13. Keep away from flammable substances and heat sources.
14. Do not leave unit unattended while in use.
15. Surfaces may become hot; avoid touching them as they could cause injury.
16. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to a service center for examination and repair.
17. This unit contains no user-serviceable parts. Do not disassemble or attempt to repair it. Doing so may void your
warranty and cause damage or injury.
GET TO KNOW YOUR TOWEL WARMER
GETTING STARTED
1.
Open the lid and remove any contents.
2.
Place the unit on a dry, level surface.
3.
Insert the plug into a standard 120V AC outlet.
4.
Your towel warmer is now ready to use.
TROUBLESHOOTING
• If the towel warmer fails to turn on, try resetting the Ground Fault Circuit Interrupter plug by pressing the
RESET
button.
• If the towel warmer is taking a long time to reach the optimal temperature, make sure that you are using only dry
towels. Trying to heat damp towels will greatly extend the heating cycle.
• If the towel warmer will not function after one warming cycle, try allowing it to cool down until the Hot Surface
Indicator light is no longer illuminated.
Power Button
Hot Surface Indicator Light
Handle
Lid
Heating Indicator Light
HOW TO USE YOUR TOWEL WARMER
Please note:
• Your towel warmer will warm two bath sheets measuring up to 40" x 70" each. For best results, use 100% cotton
or cotton blend towels.
• When the Hot Surface Indicator light is illuminated, the inside surfaces of the towel warmer are hot. Handle
with
care.
• It is normal for some condensation to form on the lid of the towel warmer.
• Do not use the towel warmer to dry wet items.
• Only use the towel warmer to warm fabrics.
• To clean the towel warmer, unplug and wipe with a dry cloth. Do not use detergents or harsh chemicals.
To warm towels:
1. Plug in the towel warmer.
2. Remove the lid and place your dry,
l
oosely folded
towels inside.
NOTE: If towels are tightly folded, they may not warm as well.
3. Replace the lid and twist it in a clockwise direction until it clicks. The lid is now locked.
4. Press the Power Button. The Heating Indicator Light will illuminate. NOTE: When the Hot Surface Indicator light
illuminates, the inside surfaces of the towel warmer are hot to the touch. Use caution.
5. The unit will automatically stop heating after 10 minutes, at which point the Heating Indicator Light will turn off.
However, towels will continue to stay warm inside the unit for up to 20 minutes.
6. To turn the towel warmer off manually, press the power button.
NOTE: Towel Warmer will not shut off unless you manually turn off the power button.
7. If you wish to use the unit to heat additional towels, you will need to allow it to cool down until the Hot Surface
Indicator light turns off.
