2. Cleaning the lint filter
Separate exhaust vent cover, lint filter, and exhaust filter with a soft brush or vacuum cleaner, as
shown in figure 2. Take care not to damage the filters.
3. Re-installing the lint filter
After cleaning, reassemble the exhaust vent cover, lint filter, and exhaust filter, and align the
center recesses with the opening in the center of the dryer drum (see figure 3). Make sure that the
filter is inserted firmly.
Cleaning the air intake filter
It is recommended to clean the air intake filter at least once a month.
1. Remove the air intake filter by grasping the upper and lower sides of the air intake cover and
pushing slightly upwards with your thumb until the latch hook disconnects.
2. Remove the filter inside the cover and clean it with a soft brush.
3. Reassemble and replace inside the dryer.
Cleaning the interior and exterior of the dryer
1. Do not spray water or any type of cleaner directly into the interior of the dryer. If dryer drum becomes
stained, clean the drum with a damp cloth.
2. Remove any residue before drying the next load.
3. Clean outer cabinet with mild soap and water. Do not use harsh or abrasive cleaners, as this could
damage the dryer.
Air Intake Cover
Air Intake Filter
Note:All accessories Optional with Extra Cost.
Air Intake Cover
Air Intake Filter
Note:All accessories Optional with Extra Cost.
Air Intake Cover
Air Intake Filter
Note:All accessories Optional with Extra Cost.
