Operation
• Connect the appliance to a power supply. The humidifier
starts in standby status and will sound a tone.
• Press the On/off button. These default settings will be
in
effect:
- Low mist 200 ml/h
±
20%
- Timer is off
- DC fan is on
- Warm mist is selected
- Relative humidity setting is 70%
• Press the mode selector button to cycle through the
sleep mode, turbo mode, auto mode, and normal mode.
Under each mode, the default is warm mist.
- Sleep mode: Warm mist with the timer automatically
set at 8 hours. Mist rate is 300 ml/h
±
20% and display
panel light will dim and then go out. Only the On/off and
mode selector functions will be available. The unit will
not be controlled by environmental humidity. In 5 seconds, normal indication returns. Humidity and timer indicators
light in 10-second intervals.
- Turbo mode: Timer is off. Mist rate is 500 ml/h
±
20%. The default humidity is 70%. You can set the timer (1 – 8 hours),
select the humidity level, and choose warm or cool mist.
- Auto mode: Timer is off. Default humidity level is 70%. If the humidity falls below 70%, the unit will automatically
activate with a mist rate of 400ml/h
±
20%. You can set the timer and choose warm or cool mist.
- Normal mode: Timer is off. The default humidity is 70%. You can set the timer. You can select the desired humidity level,
mist capacity mode (by pressing the up and down buttons), and warm/cool mist (by pressing the warm/cool mist
selector
button).
- Note about the timer function: If you change the setting to the sleep mode, the timer automatically sets to 8 hours. If
you activate the turbo mode, auto mode or normal mode, timer will stop automatically.
• Press the warm/cool mist selector button to choose cool mist or to activate the heater for warm mist. (The warm mist
indicator will light.)
• Press the settings selector button to switch between the humidity setting and timer setting. Make your selections by
pressing the up and down buttons.
NOTE: Always empty residual water from the tank after using the appliance. Clean the water tank after every 3 days of use.
Mist Volume Indicators
The red light bars on the display panel indicate the volume and rate of mist generated in milliliters per hour.
Humidity Selection
• Press the settings selector button once. The default humidity setting is 70%. (Number will flash.) Use the up and down
buttons to adjust the humidity level from 30% to 70%. After setting, the unit will display the current room humidity for
5
seconds.
• Note: "C0" will display when the unit continues to humidify regardless of the ambient humidity.
• When the humidity of the environment matches the set humidity level, the unit will stop. It will restart when the room
humidity decreases by 5%.
Timer Function
• Timer can be set from 1 to 8 hours.
• Press the settings selector button twice. "0H" will flash. Use the up and down buttons to set the timer. The timer will
commence counting down. When the timer reaches 0, the unit will go into standby mode.
• To cancel the set time, reset the timer to “0” and then use the up or down keys.
4
High: 400 ml/h
Medium: 300 ml/h
Low: 200 ml/h
