Product Overview
4
Butane Filling Instructions
1. Please only use high-quality butane gas.
2. Before filling, make sure that the on/off switch is turned to the
“O”
position.
3. Holding the appliance upside down, insert the butane gas refill
nozzle vertically into the gas refill valve as shown.
Push the butane gas refill nozzle down into the gas refill valve
until the appliance’s fuel tank is full. (When full, gas will escape from the gas refill valve.)
4. After filling the unit, allow the gas to stabilize for a few minutes before igniting.
Tips for Igniting
1. When igniting the appliance, make sure you’re holding it in an upright position.
2. Slide the ignition switch forward and hold for a minimum of three (3) seconds before
releasing it. If the unit does not light, repeat the process.
Using the Blow Torch Function
1. Ensure the torch is cool to the touch by placing your hand near the
tip to see if any residual heat is emanating from the tip (do not
actually touch the tip until you are certain it is safe!), then unscrew
the solder head by turning it counter-clockwise to remove it from the
blow torch connection. You will also need to remove the hot air
blower head in order for the blow torch to produce an open flame.
2. Remove the black plastic ring around the silver sleeve by unscrewing it in a counter-
clockwise direction. Once the black plastic ring is removed, pull the silver blow torch
sleeve off the attachment and remove the hot air blower/solder head attachment by
pushing it down through the sleeve into your hand.
Torch
Interchangeable tip
(for soldering, hot
air, etc.)
Kickstand
On/Off switch
Flame adjustment lever
Ignition button
Gas level window
Filler valve
