STEP 16 Install the Butterfly Cable (See Diagram 16)
A.) Attach one end of the 99” Butterfly Cable (#55) to a Cable Strap Bracket (#45). Place a Ø
7/8” x ½” Spacer (#80) in between the opening. Secure the Bracket to the Right Butterfly
(#6) with a M10 x 1 5/8” Allen Bolt (#100), two Ø ¾” Washers (#118), and one M10 Aircraft
Nut (#125).
B.) Pull the Cable towards the back of the machine to the right oblique Pulley on the Main Base
Frame behind the Front Vertical Beam.
C.) Draw the Cable underneath the Pulley then pull upward to the lower Pulley on the Angled
Double Floating Pulley Bracket (#26). Draw the Cable around the Pulley then downward to
the left oblique Pulley on the Main Base Frame.
D.) Draw the Cable underneath the Pulley then pull towards the Left Butterfly (#7).
E.) Repeat Step A above to secure the end of the Cable to the Left Butterfly.
26
Summary of Contents for IVK 5500
