Page 3
Operation and Maintenance
ThermoCooler HP
DSTCH.191101.01.EN
Continuous product development may give rise to specification changes without notice.
1 General
1.1 Intended use
The ThermoCooler HP cooling/heating pump is intended to be used to cool and
heat supply air in properties. The reversible heat pump is designed to be instal-
led together with IV Produkt AB air handling units.
The cooling/heating pump should not be used as a standalone unit.
When installed indoors, the air handling unit must be installed in an area that
maintains a temperature b7 ando +30°C, and with a moisture content
of <3.5 g/kg in the fan room in winter. The unit can also be equipped for outdoor
installation.
Any other use and installation in other environments is prohibited unless specifi-
cally permitted by IV Produkt AB.
1.2 Safety regulations
For safety regulations relating to the reversible heat pump installed together with
the Envistar Flex air handling unit, see Operation and Maintenance for Envistar
Flex, under order-specific documentation at
1.3 Manufacturer
The ThermoCooler HP cooling/heating pump is manufactured by:
IV Produkt AB
Sjöuddevägen 7
SE-350 43 VÄXJÖ
1.4 Designations
The reversible heat pump comes with a model rating plate placed on the front.
The model type plate shows the series number and the requisite designations to
identify the unit.
Art. Nr. 19121-0009_00
Contains fluorinated greenhouse gases
covered by the Kyoto protocol.
Circuit 1
Circuit 2
Circuit 3
Refrigerant
charge
Ordernumber
Code Key
Model
Name of project
Date of manufacture
PS Max allowable press.
PT Test pressure
TS Temperature range
Protection level - low
Protection level - high
Refrigerant, Fluid group
GWP
Code
Reversible heat pump
ThermoCooler HP
Typical model identification label
