ITW SuperFlow, Safety & Operation Instructions, Page: 2 / 2

Do’s:
Use filter and regulator on air line.
Position the air bag approximately 1” above the
floor to keep it from rubbing in transit.
Position the air bag in the void, flush with the rear
edge of the load. No part of the air bag should
stick out beyond the edge of the load.
Protect the air bag when inflating. Avoid sharp
objects and pinch points. Use cardboard and/or
plywood to protect air bag on both sides whenever
possible.
Always wear safety glasses with side shields that
conform to ANSI standard Z87.1 or EN166.
Do’s and Don’ts for using ITW Shippers Products’ SuperFlow inflation system
Don’ts:
NEVER use inflator as blowgun for cleaning.
NEVER obstruct rear vacuum opening while
inflating.
DO NOT point inflator towards face or body.
DO NOT use folded air bags in voids.
DO NOT use air bag as a leveling device.
DO NOT use air bags between the top of the
load and the trailer roof.
DO NOT place air bags between the load and
trailer door.
DO NOT use paper air bag in wet environment.
Warning: Failure to follow these instructions could result in serious personal injury and/or product damage.
Input Pressure Insert #1 Output Insert #2 Output
40 psi
50 psi
60 psi
70 psi
80 psi
90 psi
100 psi
110 psi
120 psi
0.5 lbs
0.7 lbs
1.0 lbs
1.1 lbs
1.3 lbs
1.5 lbs
1.8 lbs
2.0 lbs
2.3 lbs
Insert #2 Output
*Only for type 400 air bags.
1.0 lbs
1.4 lbs
1.6 lbs
2.0 lbs
2.3 lbs
2.9 lbs
3.5 lbs*
4.0 lbs*
N/A
1.0 lbs
1.4 lbs
1.6 lbs
2.0 lbs
2.3 lbs
2.9 lbs
3.5 lbs*
4.0 lbs*
N/A
*Only for type 400 air bags.
T SFGI / 0606
Airbags for Damage Prevention
One more innovation