ORBITALUM TOOLS GmbH
D-78224 Singen www.orbitalum.com
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN
50
Features and scope of application
GFX 3.0, GFX 6.6
eNGLISH
4. FeATUReS AND ScOPe OF APPLIcATION
4.1
Features
The GFX pipe cutting and beveling machines are distinguished by the following characteristics:
Motor
With built-in variable cutting speed and ergonomic handles.
Enables a safer operating position and cutting of tube
elbows without alteration.
Other advantages:
• Electronic overload protection with integrated tempera-
ture monitor and speed control.
• A restart inhibit function prevents the machine from
starting in an uncontrolled way after it has been re-con-
nected to the electric mains or after the voltage supply
has been re-established following a power failure.
• High performance drive (1200 W) with adjustable speed
range for cutting a selection of materials.
• Increased blade life through tachometer regulation.
• Rotating-speed indicator (3) for speed selection.
• Ergonomically positioned speed adjustment wheel (4)
and ON/OFF switch (5).
5
4
3
Additional saw blade
clamping point for cutting
tube elbows only
Which saw blade clamping point to use?
Saw blade clamping point 1:
Cutting tubes
Saw blade clamping point 2:
Cutting tube elbows only
2
1
Line laser to determine
cut-off point
To determine the cut-off point on the tube. Ideal for checking
whether the tube is adjusted to the desired cut-off point. A
red line marking (1), to determine the cut-off point, appears
on the clamped tube once the red button on the line laser
has been actuated. If necessary, the tube position can be
corrected until the desired cut-off point is marked.
1
Plug connection with
quick-disconnect coupler
For easy and comfortable replacement of the power cable.
Other advantages:
• If there is a cable fracture, then the cutter motor does
not have to be opened and a qualified electrician is not
required to replace the flex cable.
• As the flex cable is locked away, misuse can be
prevented.
