V 06/11
OptiFlex 2 C
General safety regulations
3
General safety regulations
This chapter sets out the fundamental safety regulations that must be
followed by the user and third parties using OptiFlex 2 C manual coating
equipment.
These safety regulations must be read and understood in full before the
OptiFlex 2 C is put into operation.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the ITW
Gema operating instructions. The general safety precautions must also
be followed as well as the regulations in the operating instructions.
DANGER!
danger due to live electricity or moving parts. Possible consequences:
death or serious injury
WARNING!
improper use of the equipment could damage the machine or cause it to
malfunction. Possible consequences: minor injuries or damage to
equipment
INFORMATION!
Useful tips and other information
