MR400 MAINTENANCE
4.
After 10 minutes, halt the washing cycle pressing the power button
and the
machine will stopPasados los 10 minutos, paramos el ciclo de lavado presionando el
botón de encendido
y la máquina se apagará.
1.
Remove the overflows installed inside the containers by the back of the machine. (See
illustration: 1)
2.
Once the containers are emptied, put the overflows back in.
3.
If the containers and evaporators are completely clean, you should run two washing
cycles with water only to eliminate any remains of dirt left by the previous cycle.
CAUTION: ** DISCARD THE ICE PRODUCED IN THIS FIRST CYCLE.
4.
Clean and assemble all the components, check that the grille is clean and that the
cubes slide well. Check that no slat is jammed in the curtain.
5.
Check and/or change the water inlet filters.
6.
Check that the injectors are in position. When necessary, disassemble, clean and put
them in the correct position.
5.
COLLECTOR AND INJECTORS CLEANING:
1.
Remove the curtain. 2. Remove the collectors from their axles by pulling gently
upwards.