ITV DHD 200-30, User Manual

Page: 6 / 17

ENGLISH
6
4. WATER SUPPLY (ONLY DHD 200-30 W MODELS)
The quality of the water supplied to the machine will have an impact on the time between cleanings and
ultimately on the life of the product. It also will have a remarkable influence on the appearance, hardness
and flavor of the ice and the water.
Local water conditions may require treatment of the water to inhibit scale formation, improve taste and
clarity. If you are installing a water filter system, refer to the installation instructions supplied with the filter
system.
Connect the machine only to potable water supply.
Use a flexible food grade hose.
Pressure should be between 10 and 85 psi (0.7 and 6 bar). If pressure overpasses such values, install a
pressure regulator.
ATTENTION: The machine shall be plumbed with adequate backflow protection, according to applicable
federal, state and local regulations.
Please note that a water filtration system is highly recommended for use with the ice maker atop the
dispenser and if the ice maker is an ITV brand, it is mandatory under provisions of the in ice maker warranty.
3. MINIMUM DISTANCE TO OBSTACLES
The ice dispenser may be installed against a wall or recessed. Refer to the minimum clearances recommended
in the manual of the ice machine, for efficient operation and servicing.
Note that, the location must allow enough clearance for electrical, drain and (in DHD 200-30 W models)
water connections in the rear of the ice dispenser.
20
6” (15cm)