MS ICE MAKER MAINTANEANCE
tray is 0.8 gal for MS 500 and 1.6 gal for MS 1000 and 0.9 gal for MS 700).
19.
Allow the solution to circulate in the water system for 20 minutes and then set
the ice-wash switch to the OFF position.
20.
To purge out the sanitizer solution and residue move the ice-wash switch to the
WASH position (drain and refill) and allow the water to circulate for 5 minutes
and then move the switch to the OFF position (drain). Repeat this operation two
more times to rinse thoroughly.
21.
Return the panel to their position.
22.
Set the ice-wash switch to the ON position (position I) and discard the first two
harvests.
1.1.
Cleaning the bins (for undercounter models)
1) Disconnect the machine, close water faucet and empty storage bin of ice
2) Use the cleaner/water solution to clean all surfaces of the bin. Use a nylon
brush or cloth. Then rinse all areas thoroughly with clean water.
3) Use the sanitizer/water solution to sanitize all surfaces of the bin. Use a
nylon brush or cloth.
4) Rinse with plenty of water, dry, run the machine and open water faucet.
5. MAINTENANCE TABLE:
MAINTENANCE
Dusty ambient
Normal ambient
Air condenser cleaning
6 months
12 months
MAINTENANCE
Hard water (over 400ppm)
Soft water (less than 400
ppm)
Water filter changing
6 months
12 months
Hydraulic circuit cleaning
6 months
12 months
Sanitation cleaning
6 months
6 months
Exterior cleaning
To do by user
To do by user
Stock bin cleaning
To do by user
To do by user