FCC Caution.
1. This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
2. Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
3. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter
The WIFI module is designed to comply with the FCC statement. FCC ID is 2AEU8UB12.
The host system using Windos7, should have label indicated it contain modular’s FCC ID
2AEU8UB12
This radio module must not installed to co-locate and operating simultaneously with other
radios in host system , additional testing and equipment authorization may be required to
operating simultaneously with other radio.
