ITT NEO-DYN 182P Installation And Operation Manual Download Page 16

 

 

WARRANTY INFORMATION 

A. Warranty

ITT Industries (ITT) warrants that at the time of shipment, the 
products manufactured by ITT Neo-Dyn and sold hereunder, will 
be free from defects in material and workmanship and will 
conform to the specifications furnished or approved by ITT. 

B. Warranty Adjustment

If any defect within this warranty appears, the Buyer shall notify 
ITT immediately. 
ITT agrees to repair or furnish a replacement for, but not install, 
any product which, within one (1) year from the date of shipment 
by ITT shall, upon test and examination by ITT, prove defective 
within the above warranty. 
No product will be accepted for return or replacement without the 
written authorization of ITT. Upon such authorization, and in 
accordance with instructions by ITT, the product will be returned 
with shipping charges prepaid by the Buyer. Replacements made 
under this warranty will be shipped prepaid. 

C. Exclusion from Warranty

THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES 
ALL OTHER EXPRESSED OR IMPLIED WARRANTIES OF 
MERCHANTABILITY, OR FITNESS, OR OTHERWISE. 
Components manufactured by any supplier other than ITT shall 
bear only the warranty made by the manufacturer of that product, 
and ITT assumes no responsibility for the performance or 
reliability of the unit as a whole. 
In no event shall ITT be liable for indirect, incidental or 
consequential damages nor shall the liability of ITT arising in 
connection with any products sold hereunder (whether such 
liability arises from a claim based on contract, warranty, tort or 
otherwise) exceed the actual amount paid by Buyer to ITT for the 
products delivered hereunder. 
The warranty does not extend to any product manufactured by 
ITT, which has been subject to misuse, neglect, accident, 
improper installation, or to use in violation of instructions 
furnished by ITT. 
The warranty does not extend to or apply to any unit, which has 
been repaired or altered at any place other than at ITT’s factory or 
service locations, by persons not expressly approved by ITT. 
 

Summary of Contents for NEO-DYN 182P

















Reviews: