ITT LED 39F-7175 series, Manual

Page: 56 / 76

52
Speakers
To hear the TV audio from the connected compatible audio device set as Amplifier .
You can use the remote control of the TV to control the volume of the audio device.
Installation Menu Contents
Automatic channel
scan (Retune)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:
Searches and stores analogue stations. Satellite: Searches and stores satellite
stations.
Manual channel scan
This feature can be used for direct broadcast entry.
Network channel
scan
Searches for the linked channels in the broadcast system. Digital Aerial: Searches
for aerial network channels. Digital Cable: Searches for cable network channels.
Analogue fine tune
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
Satellite Settings
Displays satellite settings. Satellite list: Displays available satellites. You can Add ,
Delete satellites or Edit satellite settings on the list. Antenna installation: You can
change satellite anntenna settings and/or start a satellite scan.
Installation Settings
Displays installation settings menu. Standby Search (Optional): Your TV will search
for new or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service List
Use this setting to clear channels stored. This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to
be listed in the channel list. This feature is available only for the country option of
Norway.
First time installation
Deletes all stored channels and settings, resets TV to factory settings.