ELIPTICAL
FOLDAWAY
16' X 7' ELLIPTICAL FOLDAWAY GOAL - FITTING INSTRUCTION
TWIST AND LOCK NET FIXINGS
GROUND FRAME
NET FIXING
A
A
A
P
A
B
BARREL
LOCK
BARREL
LOCK
KEY
KEY
Ensure locking
pin is inserted
fully
DO NOT THROW THE
LOCKING PINS AWAY
3
Push locking
pin down
centre
2
Insert ground frame
net fixings into holes
on ground frame
On back frame fix all the same way with opening facing
inwards.
On side frames along the ground fit alternate
1
Fit into groove on elliptical posts, Twist 90 degrees to
secure. Position the fixings no more than 340mm apart.
F
F
CONNECTOR BALANCE
SNAP ON LOOPS
& WIRE
FOOTBALL GOAL POST
COUNTER BALANCE
WEIGHTS 17Kg
STEEL COUNTER
BALANCE WEIGHTS
For use indoors or on
artificial surfaces are
available.
Option 1
Used externally with an
additional connecting
strap
1.
2.
Back ground
frame
Option 2
Used internally. Place
inside the back frame.
MULTI-SURFACE ANCHOR
NET TIE
12
STANDARD GROUND PEG
12
6
COMPONENTS
A
E
B
34
2
4
2
1
QTY
QTY
TWIST AND LOCK NET
FIXING
CORNER BRACKETS
M10 SOCKET DOME SCREW &
HEX DOME NUT
-
80mm LONG
BLANKING CAP
GOAL NET
F
I
J
K
L
2
4
BRASS BARREL LOCK
KEY
C
D
1
1
LEFT SIDE FRAME
RIGHT SIDE FRAME
BACK GROUND FRAME
70mm Diameter
POST SECTIONS
M
M
CROSSBAR SECTION
115mm x 100mm Diameter
1
1
O
P
WE RESERVE THE RIGHT TO AMEND THE SPECIFICATIONS OF OUR PRODUCTS IN THE INTEREST OF CONTINUED DEVELOPMENT. YOUR PRODUCT THEREFORE MAY DIFFER LIGHTLY TO THOSE ILLUSTRATED. E&OE
WORLDWIDE © COPYRIGHT 2013 ITSA GOAL POSTS LTD, ALL RIGHTS RESERVED A REGISTERED DESIGN
Fit tie into bottom horizontal
slot pull tight onto perimeter
net cord not more than 340mm
apart. Wrap tie around posts
and pull through top horizintal
slot to secure. Use in corners
on ground fame and along net
support tubes.
IF USING COUNTER BALANCE WEIGHTS
TOTAL WEIGHT REQUIRED TO CONFORM
TO BS8462:2012 is
107 Kg
6 external weights (pairs) with one single
weight inside the back ground frame
COUNTER BALANCE WEIGHT
OPTIONAL EXTRA
CONFORMS TO BS8462:2012
SPARE PARTS TEL:
0114 24 34 200
SIDE FRAMES CAN BE FOLDED
INWARDS AND LOCKED IN
POSITION FOR COMPACT STORAGE.
ENSURE THE GOAL IS SAFELY
SECURED WHEN NOT IN USE
IDEALLY LAID ON THE GROUND.
RECOMMENDED
OPTIONAL
REMOVABLE
TRANSPORTER
WHEELS
AVAILABLE
OPTIONAL
REMOVABLE
LIFTING
HANDLES
FOR USE WITH
WHEELS
REMOVE BACK GROUND FRAME
FOLD INWARDS
AND LOCK.
Lugs
If lugs prevent the rod being
inserted fully, nip the plastic
lugs off so the fixing sits flush
Insert rod
slightly lower
than level
Push the rod slightly inside.
Make sure the rod does not go fully
through and fall out or the fixing
will not lock
10mm
30
GROUND FRAME NET
FIXING
L
WARNING
ALL GOALS MUST BE SECURELY ANCHORED
AND OR CORRECTLY COUNTER BALANCED IN
ACCORDANCE WITH CURRENT GOALPOST
SAFETY STANDARDS AT ALL TIMES. CONTACT
THE FOOTBALL ASSOCIATION FOR THE
LATEST SAFETY INFORMATION & READ OUR
CARE AND MAINTENANCE DETAILS.
THE GOAL MUST BE HANDLED CAREFULLY - DO NOT
DRAG GOALS. DO NOT USE GOAL FRAMES WITHOUT
LOCKS. GOALS MUST ALWAYS BE FULLY DISMANTLED
AFTER USE. THE STANCHIONS ARE FOR SUPPORTING
NET ONLY; DO NOT LIFT GOAL WITH THE STANCHIONS.
LONGER PEGS ARE AVAILABLE FOR USE ON SANDY
GROUND. ON GRASS, A RISK ASSESSMENT OF SOIL
CONDITIONS SUITABILITY SHOULD BE CARRIED OUT
WHEN ANCHORS ARE TO BE USED. ANY DAMAGE
CAUSED BY MIS-USE IS NOT COVERED UNDER THE
GUARANTEE
R
Registered Design
5000197 5000198 5000199
European & USA Patent GB 2423260
