©
C
op
yr
ig
ht
Ek
se
la
ns
, a
ll r
igh
ts
re
se
rved
V001
IPCOAX IPC-M User Manual
48 of 61
Confidential
Master Unit EKOAX IPC-M
•
Connection type: Static IP or DHCP.
•
IP address: the IP address of the IPC-M unit inside of the LAN.
•
Subnet mask
•
Default gateway
Note: Changing the IP address, subnet mask, default gateway can lead to failure
during the access to the web user interface of the IPC-M.
2.5.3.
VLAN
If you enter the NETWORK→ VLAN men
u, the screen shown in Picture is displayed:
You can configure the VLAN of IPC-M in this page. Click the modify button after you enter
the VLAN ID to active the VLAN.
Note: If you active the VLAN of IPC-M, you should also do some configuration in your PC
to keep the connection between the master and the management PC.
2.5.4.
SNID
The NETWORK→ SNID menu shows the page displayed in Picture
The SNID is the Serial Number Identification number which is used to identify uniquely to
the master unit. If there are several masters placed in the same network, you must set a
different SNID for each master in order to avoid the interference among the master units.
2.5.5.
Filter
The NETWORK→
Filter menu shows the page displayed in Picture.
Picture
41
Picture
42