ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain) Telf:
+34935839543 · [email protected] · www.ek.plus
4
USER MANUAL
KIT IP-W
Connection
In order for the Kit to function properly, it must be connected as follows:
1.
The IPC BMH master unit must be connected with an Ethernet cable to the main router. The
RF output must be connected to the power outlet using the MI RP IEC. The equipment is
powered through its power supply.
2.
The IPC-S2 slave device will be connected at the point where the network connection is to
be provided. The RF
“CABLE”
input must be connected to the power outlet socket using the
MI RP IEC. There is another RF
“TV”
jack, which can be connected directly to an RF receiver if
necessary. The Ethernet network cable will connect to any of its two ETH ports. If wanting to
add the
“IPTV “set
-
top BOX”
it must be connected to the IPTV receiver to the STB 1 or 2 port.
The equipment is powered through its power supply and press the On /Off button.
