ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
20
USER MANUAL
CPE 1200-O
How to add MAC to the list:
1.
Pick Allow Listed or Deny Listed.
2.
Input the MAC
3.
Press Add
4.
The added MAC will go to the Access Control List.
5.
Press Apply
Advanced Settings.
•
Regional: Select the region.
•
MODE: Select the standard for the Wireless N/AC.
•
RF Output Power : Control the wireless output power. This affects the coverage range.
IMPORTANT: EKSELANS BY ITS RECOMMENDS FOLLOWING CURRENT MAXIMUM
TRANSMISSION POWER REGULATIONS. EKSELANS BY ITS IS NOT RESPONSIBLE FOR THE
IMPROPER USE OR CONFIGURATION OF THE ACCESS POINT AND ITS TRANSMISSION
POWERS.
•
RTS Threshold: Lower this value if you have problems with electromagnetic interface or
overload of traffic on a network.
•
Ack Timeout control: Interval for the ACK, the devices is waiting to get the ACK response from
the device. Too long time might reduce a bit the bandwidth.
•
Beacon interval: The time interval for the beacon. The beacon time is a packet sent to the client
device to notify if the device is on. Reducing this time will sent more packets making the net a
bit slower. Too high value will make the device disconnect more often.
•
MAX User: Set the max client numbers that can connect to the device.
•
Aggregation: Allows a higher throughput.
•
Short GI: Help improve the throughput, use it only for N mode if used mixed mode please
disable.
•
User isolation: ON: The users cannot see each other in the network.
