Operating Instructions
3
Rear Panel
7. CAT-5E/6 out ports 8. HDMI output
9. HDMI input 10. Power input
DIP Switch for EDID Setting
DIP Switch
EDID
0000
Default (1080P2D 2ch)
0001
Copy from HDMI output
0010
1080P2D 2CH
0011
1080P2D 6CH
0100
1080P2D 8CH
0101
Reserved
0110
1080P3D 2CH
0111
1080P3D 6CH
1111
1080P3D 8CH
Connecting and operating
1) Connect the HDMI input source into HDMI splitter.
2) Connect HDMI splitter and receiver by single cat5e/6 cable
(The cable termination must follow the standard of EIA/TIA 568B).
3) Connect the HDMI display (such as HD-LCD/HD-DLP) into the HDMI output of
receiver.
4) Connect the Loop HDMI output port of HDMI Splitter with the HDMI Display (such
as HD-LCD/HD-DLP) by HDMI cable.
5) Plug IR TX cable and IR RX cable to IR port of the Splitter.
6) Plug IR TX cable and IR RX cable to IR port of the Receiver.
7) Insert the DC 5V power supply into HDMI splitter and receiver.
