Itowa ITW 4 LEVEL, User Manual

Page: 11 / 24

ITW LEVEL
USER MANUAL
7
2.3.
ITW LEVEL RECEIVERS
The receiver is the system responsible to process the radio signal from the transmitter and to
activate the relay outputs.
NOTICE: IF WE FEED THE RECEIVER FIRST, IT WILL MAINTAIN THE RELAY
OF INCIDENCE IN THE SYSTEM INDICATING THERE IS A
COMMUNICATION FAILURE, UNTIL THE TRANSMITTER IS NOT
CONNECTED TO THE VOLTAGE.
.
2.3.1. RECEIVER INSTALLATION.
NOTICE: BEFORE TO MAKE ANY CONNECTION, VERIFY THAT THE SYSTEM
IS NOT CONNECTED TO THE NET NOR IT HASN’T ANY VOLTAGE, IN
CASE IT HAS VOLTAGE, IT MUST BE DISCONNECTED.
The system is designed to be easily and quickly installed.
It is recommended to install the equipment in a place protected from the unpleasant weather,
as well as to place it in a fixed place. To facilitate this operation, the equipment is supplied with
a set of 4 earmuffs for fixing to the wall or at any other fixed element by screws and cleats.
2.3.2. CONNECTIONS OF THE LEVEL ITW RECEIVER
The control elements of the pumps or machinery are connected with the receiver through the
relays outputs.
To facilitate the connection of these signals to the circuitry of the equipment, there are a
series of terminals for this purpose, also, the following pages are attached the wiring
diagrams of the following equipment.
POWER SUPPLY Connection