9
CAMERA REMOTE
To access camera remote on iTOUCH Fuse, first open the camera app on your smartphone and hold the
button on the Camera feature on your smartwatch to snap a photo.
WEATHER
Once your smartwatch is fully paired to the app, the weather feature will show on your wearable device.
Your smartwatch shows weather updates hourly.
To change from Farenheit to Celsius, navigate to additional features on the iTOUCH Fuse app. From there
you can input the city you would like to see the weather for.
FIND DEVICE
Tap Find Device under additional features to vibrate your iTOUCH Fuse.
WEAR AND CARE
All iTOUCH Wearable products are meant to be worn all day and night, so it’s important to follow a few
simple guidelines as you wear and care for your device.
To keep your b and clean and your skin happy, we recommend the following tips:
- Clean your band and wrist regularly - especially after intense workouts or sweating. Rinse the band
with water or wipe it with a small amount of rubbing alcohol. Do NOT use hand soap, dish soap, hand
sanitizer, cleaning wipes or household cleaners, which could get trapped beneath the band and irritate
your skin. Always pat dry the band before putting it back on.
Note: Although iTOUCH Fuse is water resistant, it is not good for your skin to wear a wet band for long
periods of time.
Make sure to wear your band loosely enough that it can move back and forth on your wrist. Prolonged
rubbing and pressure may irritate the skin, so give your wrists a break by removing the band for an hour
or two after extended wear.
IMPORTANT TIPS:
- If you have allergies, asthma, or eczema, you may be more likely to experience a skin irritation or allergy
from a wearable device. If you start to experience skin irritation or redness on your wrist, remove your
device. Contact a dermatologist if symptoms persist longer than 2-3 days of not using your wearable
device.
UPDATE, RESTART, AND ERASE
If you can’t sync your iTOUCH Fuse, or if you have trouble with connected GPS or tracking your stats, you
can restart your tracker from your wrist or app. From the smartwatch, navigate to Settings and tap Shut-
down. If restarting the smartwatch doesn’t address the issue, tap Reset in Settings.
