TGMD400 OPERATOR’S MANUAL
4
www.itmtools.com.au
Safety - Peronal
1. Dress properly, do not wear loose clothing
or jewellery, they can invite personal injury.
Always cover long hair.
2. When operating power tools suitable
personal protective equipment must be worn
where necessary, including, but not restricted
to eye, ear, respiratory and foot protection.
3. Stay alert, do not use power tools when
tired or under the influence of alcohol, drugs
or medicine as injury may occur.
Safety - Operation
1. Secure the work in the vice. Do not hold
material by hand.
2. Keep proper footing and balance at all
times when using tool.
3. Keep hands away from cutting area while
machine is in operation.
4. Guards should be in place and in working
order. Remove adjusting keys and wrenches
before turning on.
4. Ensure cutting tool is correctly secured
into machine before operation.
Safety - After Use
1. Disconnect machine from power when not
in use.
2. Store machine in a dry place, well out of
reach of children.
MACHINE OPERATION
CHANGING THE GEAR BOX OIL
Place a bucket to catch the oil onto the work
table, then remove the oil drain socket head
bolt located within the drill head as shown in
Figure 1, and allow the oil to drain from the
opening completely. Then replace & tighten
the oil drain socket head bolt into it’s original
position. Remove the oil filler bolt shown in
figure 2, fill the oil in the gear box with
standard 80weight gear oil until the oil level
reaches the middle of oil fluid level indicator
glass. Then replace and tighten the bolt.
2
FIGURE 1
FIGURE 2
