PRO 36 AD
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The PRO 36 AD is a drilling machine with electromagnetic base, designed to drill
holes with diameters of up to 36 mm (1-
7/16″). The machine can drill to a depth of up
to 20 mm (13/16″) by using HSS annular cutters or to a depth of up to 30 mm (1
-
3/16″) by using TCT annular cutters.
The electromagnetic base clamps the machine to ferromagnetic surfaces. This
makes sure that the operator is safe and the machine works correctly. A safety strap
protects the machine from falling in case of a clamping loss.
With an optional HSS quill assembly you can drill holes to a depth of up to 25 mm
(1″) by using HSS cutters or twist d
rill bits with a 19 mm Weldon shank.
1.2. Technical data
Voltage
1~ 110–120 V, 50–60 Hz
1~ 220–240 V, 50–60 Hz
Power
1020 W
Tool holder
19 mm (3/4
″)
Weldon
Maximum drilling diameter with annular cutter
36 mm (1-7/16
″)
Maximum drilling diameter with twist drill bit
12 mm (1/2
″)
Maximum drilling depth with HSS cutter or drill bit
20 mm (13/16
″)
*
Maximum drilling depth with TCT cutter
30 mm (1-3/16
″)
Clamping force
(surface with the thickness of 25 mm and roughness
R
a
= 1.25)
8 900 N
Electromagnetic base dimensions
90 mm × 180 mm × 38.5 mm
3-9/16
″
× 7-1/16
″
× 1-1/2
″
Stroke
39 mm (1-1/2
″)
Rotational speed with no load
550 rpm (for 115
V)
580 rpm (for
230 V)
Rotational speed with load
350 rpm (for 115
V)
370 rpm (for
230 V)
Minimum workpiece thickness
6 mm (1/4
″)
Protection class
I
Noise level
More than 85 dB
Required ambient temperature
0–40°C (32–
104°F)
Weight
9.5 kg (21 lbs)
* Up to 25 mm (1
″) w
hen used with an optional HSS quill assembly (ZSP-0521-04-00-00-0
)
.
