BM-18A
This document is protected by copyrights.
Copying, using,
or distributing without permission of PROMOTECH is prohibited.
12
3.4. Adjusting the bevel width
Unplug the machine from the air source. Loosen the lever (
1
) and rotate the sleeve
(
2
) so that the scale (
3
) shows the height ‘a’ (Tab. 1) related to the required width ‘b’.
Tighten the lever.
Milling head
22.5°
30°
37.5°
45°
50°
5
5°
60°
Height ‘a’
[mm]
Width ‘b’
[mm]
2
2.2
2.3
2.5
2.8
3.1
3.5
4.0
3
3.2
3.5
3.8
4.2
4.7
5.2
6.0
4
4.3
4.6
5.0
5.7
6.2
7.0
8.0
5
5.4
5.8
6.3
7.1
7.8
8.7
10.0
6
6.5
6.9
7.6
8.5
9.3
10.5
12.0
7
7.6
8.1
8.8
9.9
10.9
12.2
14.0
8
8.7
9.2
10.1
11.3
12.4
13.9
16.0
9
9.7
10.4
11.3
12.7
14.0
15.7
18.0
10
10.8
11.5
12.6
14.1
15.6
17.4
11
11.9
12.7
13.9
15.6
17.1
18.0
12
13.0
13.9
15.1
17.0
18.0
13
14.
1
15.0
16.
4
18.0
14
15.2
16.2
17.
6
15
16.2
17.
3
18.0
16
17.
3
18.
0
17
18.0
Tab. 1.
Relation between the bevel width and height of the available milling heads
1
2
3
