ILS-S810-0IR
DOC-S810-0IR-MNL Rev1.doc (9/22/2021)
Page 7 of
18
Copyright 2021 ITL, LLC
Installation
The following section describes how to install the ILS-S810-0IR obstruction light.
Unpacking your LED Obstruction Light
Please examine the shipping containers and their content thoroughly upon receipt and
report any potential shipping damage to the carrier.
Tools for Installation
The following tools are suggested for mounting of the ILS-S810 obstruction lights.
Digital multi-meter capable of reading 600VAC/DC (Fluke 177 or 179)
Nut Drivers and Sockets
#2 Phillips Screwdriver
Infrared Remote Control (Optional)
Quick Installation
The ILS-S810-0IR requires direct sunlight exposure for up to 40 minutes to activate after
being removed from the packaging. The unit will indicate it is functioning by flashing red
LED I3 every 5 seconds. See next section for selection of 43H or 43J Red Intensity.
The ILS-S810-0IR includes standard industry 3 and 4 hole mounting patterns.
The ILS-S810-0IR must be mounted in the upright position.
Use the mounting kit to attach the base. Do not mount in an area that is often shaded.
Visually verify proper day/night operation.
