10
e)
Drill a hole for the power cable in the rear of the enclosure,
or go to step f if a cable tray is used. Go to step h if no cable
tray is used.
f)
Power supply connection with cable duct:
i) Mount the cable using the strain relief provided. Connect the
wiring as indicated in the chapter "Connecting the power
supply".
j) Mount the cover plate on the fan and screw it into place.
g)
Prepare and mount the supplied wire grommet on the top
side.
k) Replace the housing.
h)
Place the fan (with the supplied white foam between the wall
and the fan to reduce vibrations and air leakage) and screw it
into the wall or ceiling.
