35
e)
Clean the impeller with a soft brush. Make sure that
any balancing clips remain on the impeller.
f)
In case of severe soiling, it is advisable to clean the
RH sensor and the housing around it (A) also with a
soft brush. To do this, remove the circuit board from
the housing.
g)
If necessary, the impeller can be loosened
from the motor plate by loosening the four
nuts.
A
Summary of Contents for 03-00398
Page 1: ...Installation use Itho Daalderop CVE S ECO D...
Page 2: ...Original document...
Page 12: ...12...
Page 22: ...22 ithodaalderop 4 Operation 1 2 3 Q 0 4 5 6 0 J 000 S...
